The Procter Automotive Guide to Proper Fluids for Your Vehicle
The automotive professionals at Procter Automotive would like to give Abilene drivers an update on some of the things happening in automotive fluids. You know, vehicles are becoming more sophisticated every day. Fluids such as, oil, coolant and transmission fluid are becoming more specialized at about the same pace.
The Abilene do-it-yourselfer has to be pretty careful so that they do not actually harm their vehicle with the wrong type of fluid. That is why so many TX ] owners rely on the advice of their friendly and knowledgeable Procter Automotive service advisor to not only get the correct family of fluids, but to suggest the formulation that is best for their vehicle and their driving habits in the Abilene area.
Let’s start with engine oil. Abilene drivers who have been paying attention will have noticed a number of new oil weights on the TX scene in the last several years. Modern engines are built to much tighter tolerances and have very complicated valve trains. The oil must be thin enough to lubricate complicated parts when the engine is cold. The weight of an oil is expressed in terms like 20-W-50 or 5-W-30. The vehicle manufacturers recommend the weight of oil for each vehicle they make. The recommendation is based on engine design. Your Abilene service center will know what weight your vehicle manufacturer recommends – and it’s important to follow those recommendations. Your service advisor at Procter Automotive can also offer suggestions for special formulations and can tell you all about conventional and synthetic oils.
Antifreeze, or engine coolant, is another area that has become more complicated. For a long time, vehicle manufacturers only recommended a couple of different types of coolant. Now, several different formulations are needed because of the high-tech materials that vehicle manufacturers are using to build the cooling system. Using the wrong type of coolant in your vehicle can actually void your warranty, so it’s important to get that right.
Transmission fluid is becoming specialized for Abilene vehicles as well. New transmission designs have particular requirements that require specific formulations. Recently, new, somewhat confusing, standards for brake fluid have also been released.
Not too long ago, there was a good chance that all of the vehicles at your house would use many of the same fluids. However, as automotive technology advances, the array of basic automotive fluids TX drivers need will grow. And, some of the formulations will cost a little more for Abilene drivers. Fortunately, Procter Automotive will continue to update their training to keep pace with technology so that you’ll get the right fluids your vehicle needs. It’s all part of the commitment we make to your driving peace of mind.